Katalog izdelkov

Product features:

• Selectable input/output ranges with front panel switches:
  0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
  0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
• 3 way isolation
• 20 V transmitter supply on the input for two wire transmitters
• Error: < 0.05%
• Temperature-coefficient: 25 ppm / °C typ.
• 19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
• TS-35 rail mounting, 12.5 mm width
• Square Root Characteristic

Type designation:

DT1102 ROOT  19–50 VDC / 19–35 VAC power supply type

DT1102 ROOT PS  90–250 V AC/DC power supply type

Product features:

• Selectable input/output ranges with front panel switches:
  0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
  0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
• 3 way isolation
• 20 V transmitter supply on the input for two wire transmitters
• Non-linearity: <0.01%
• Temperature-coefficient: 25 ppm / °C typ.
• 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
• TS-35 rail mounting, 12.5 mm width

Type designation:

• DT1102  20-50 VDC / 19-35 VAC power supply type
• DT1102 PS  90-250 V AC/DC power supply type

Product features:

• Any output voltages between 6-24 VDC range
• 6 / 8 / 10 / 12 / 15 / 18 / 24 VDC nominal output
• Overcurrent-protection
• Overvoltage-protection
• 230 VAC power supply
• TS-35 rail mounting, 35 mm width
• 11 different types

Product features:

• Pt100 / Pt500 / Pt1000 inputs
• Resistance / potentiometer inputs
• 2 / 3 / 4 wire measurement
• -200°C-800°C / 0-4000 ohm input ranges
• 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
• 0,03% accuracy
• Easy configuration via IR transmission
• 19-35 VDC supply voltage
• TS-35 rail mounting, 12.5 mm width

Product features:

• NAMUR / contact inputs
• Relay contact / transistor outputs
• 1 / 2 / 4 channel versions
• Line fault detection
• Switch selectable mode of operation
• 3 kHz transmission frequency (transistor output)
• 19-29 VDC supply voltage
• 12.5-22.5 mm széles, TS-35 sínre pattintható kivitelek
• 11 different types

Product features:

• 0-20 mA / 4-20 mA / 0-10 V inputs
• 0-20 mA / 4-20 mA / 0-10 V outputs
• Non-linearity < 0,01%
• Temperature-coefficient < 50 ppm / °C
• 19-29 VDC supply voltage
• TS-35 rail mounting, 12.5 mm width
• 9 different types

Product features:

• 0-20 mA / 4-20 mA / 0-10 V inputs
• 0-20 mA / 4-20 mA / 0-10 V outputs
• 17 VDC / 18 VDC transmitter supply
• Non-linearity < 0.01%
• Temperature-coefficient < 50 ppm / °C
• 19-29 VDC supply voltage
• TS-35 rail mounting, 12.5 mm width
• 18 different types

Product features:

• 3 x 0-125 VAC / 0-250 VAC galvanic isolated voltage inputs
  3 x 0-5 AAC / 0-1 AAC galvanic isolated current inputs
  CATIII measuring category
• Neutral current measurement
• Harmonic analysis and THD measurement on voltages and currents
• Flicker measurement
• Voltage asymmetry measurement
• Network analysis according IEC61000-4-30
• Storage trends, evens and ADC samples on SD card
• Colour TFT graphics display
• RS485 / Ethernet interface
  MODBUS RTU / ASCII slave / MODBUS TCP, HTTP, FTP, SMTP protocol
• 0-20 mA / 4-20 mA galvanic isolated transmitter outputs
• RS485 interface, MODBUS RTU/ASCII slave protocol
• Digital outputs (Pulse output, Limit output)
• Menu settings
• 19-35 VAC / 20-50 VDC vagy 90-250 V AC/DC power supply
• 96 x 96 mm panel instrument

Product features:

• Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
• RS485 communication output with MODBUS RTU/ASCII slave protocol
• Configurable input and communication parameters via USB port
• 3 way isolation
• Non-linearity: <0.01%
• Temperature-coefficient: 25 ppm / °C typ.
• 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
• TS-35 rail mounting, 12.5 mm width

Type designation:
DT1102 M 20-50 VDC / 19-35 VAC power supply type
DT1102 M PS 90-250 V AC/DC power supply type

Product features:

• Pt100 input
• 3 or 4 wire measurement
• -200°C-600°C measurement ranges
• Two wire 4-20 mA transmitter
• 0.2°C accuracy
• 875 uA measuring current
• TS-35 rail mounting, 12.5 mm width