Product was successfully added to your shopping cart.
0item(s)

Vaša košarica je prazna

DATCON

Set Descending Direction

   

Izdelki 41 do 50 od 59 skupaj

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Prikazovalnik Procesnih Veličin DT4222

    DT4222 features:

    • 0-20 mA / 4-20 mA / 0-10 V / 2-10 V / 0-5 V inputs
    • 5 digit LED display, 20.4 mm character height
    • 0,03% accurary
    • 0-20 mA / 4-20 mA, galvanic isolated output(optional)
    • 2 limit relay output (optional)
    • RS232 / RS485 communication, Modbus RTUprotocol (optional)
    • 144 x 72 mm panel instrument
    • 18-35 V AC/DC or 180-250 V AC/DC power supply
    • Protection IP65 (front), IP30 (rear)

  2. Prikazovalnik Procesnih Veličin DT4220 E

    DT4220 E features:

    • 0-20 mA / 4-20 mA / 0-10 V / 2-10 V / 0-5 V inputs
    • 5 digit LED display, 14.2 mm character height, colors: red, yellow, green, blue
    • 0,03% accuracy
    • 0-20 mA / 4-20 mA, galvanic isolated output(optional)
    • 2 limit relay output (optional)
    • RS232 / RS485 communication, Modbus RTUprotocol (optional)
    • 96 x 48 mm panel instrument
    • 19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • Protection IP65 (front), IP30 (rear)

  3. Prikazovalnik Procesnih Veličin DT9000 N, DT9002 N

    DT9000 N / DT9002 N features:

    • Display in engineering units
    • 4 1/2 digit LCD, 20.5 mm character height
    • 4-20 mA loop powered
    • 2 isolated limit outputs
    • Min / Max values detection
    • 0.01% accuracy, ±20 ppm / °C
    • Easy on-site configuration
    • IP 65 front side
    • IP 65 rear side (DT9000 N)
      IP 30 rear side (DT9002 N)

  4. (Ex) Termometer DT9502

    DT9502 features:

    • Pt100 input, 3 / 4 wire measurement
    • Intrinsically safe (zone 1, 2)
    • 0.1 °C sensitivity, -200–600°C measuring range
    • 4-20 mA loop powered
    • 0.03% accuracy
    • 2 isolated limit outputs
    • Easy on-site configuration
    • Calibrated sensor curve fitting
    • Min / Max values detection
    • Large size (20.5 mm) display
    • IP 65 front
      IP 30 rear

  5. Merilnik Izmenične Napetosti DT4240

    Product features:

    • 0-125 VAC / 0-250 VAC / 0-450 VAC (rms max.) inputs
    • 5 digit LED display, 14.2 mm character height
    • 0.03% accuracy
    • 0-20 mA / 4-20 mA, galvanic isolated output
    • Min / max values detection
    • 2 limit-relay outputs
    • RS232 / RS485 communication, MODBUS RTU protocol
    • 96 x 48 mm panel instrument
    • 18-40 V AC/DC or 180-250 V AC/DC power supply
    • IP65 front side protection

  6. Merilnik Izmeničnega Toka DT4260

    Product features:

    • 0-1 AAC / 0-5 AAC inputs
    • 5 digit LED display,14.2 mm character height
    • 0.03% accuracy
    • 0-20 mA / 4-20mA galvanic isolated output
    • Min / max values detection
    • 2 limit-relay outputs
    • RS232 / RS485 communication, MODBUS RTU protocol
    • 96 x 48 mm panel instrument
    • Protection IP 65 (front), IP 30 (rear)
    • 24 V AC/DC or 230 V AC/DC power supply

  7. MODBUS Galvanski Izolator DT1102 M

    Product features:

    • Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
    • RS485 communication output with MODBUS RTU/ASCII slave protocol
    • Configurable input and communication parameters via USB port
    • 3 way isolation
    • Non-linearity: <0.01%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width

    Type designation:
    DT1102 M 20-50 VDC / 19-35 VAC power supply type
    DT1102 M PS 90-250 V AC/DC power supply type

  8. Nastavljiv Galvanski Izolator DT1102 V

    Product features:

    • Selectable and scalable input ranges:
      -125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
    • Selectable and scalable output renges:
      0-22 mA / 0–10.5 V
    • Configurable input and output parameters via USB port
    • 3 way isolation
    • Non-linearity: <0.01%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width

    Type designation:
    DT1102 V  20-50 VDC / 19-35 VAC power supply type
    DT1102 V PS  90-250 V AC/DC power supply type

  9. Nastavljiv Galvanski Izolator z Korenjenjem DT1102 ROOT

    Product features:

    • Selectable input/output ranges with front panel switches:
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
    • 3 way isolation
    • 20 V transmitter supply on the input for two wire transmitters
    • Error: < 0.05%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width
    • Square Root Characteristic

    Type designation:

    DT1102 ROOT  19–50 VDC / 19–35 VAC power supply type

    DT1102 ROOT PS  90–250 V AC/DC power supply type

  10. Nastavljiv Galvanski Izolator DT1102

    Product features:

    • Selectable input/output ranges with front panel switches:
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
    • 3 way isolation
    • 20 V transmitter supply on the input for two wire transmitters
    • Non-linearity: <0.01%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width


    Type designation:

    • DT1102  20-50 VDC / 19-35 VAC power supply type
    • DT1102 PS  90-250 V AC/DC power supply type

Loading ...Load More ...
Set Descending Direction

   

Izdelki 41 do 50 od 59 skupaj

  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
[profiler]
Memory usage: real: 40894464, emalloc: 40470880
Code ProfilerTimeCntEmallocRealMem