Product was successfully added to your shopping cart.
0item(s)

Vaša košarica je prazna

Prenosni instrumenti

Kimo prenosni instrumenti so namenjeni merjenju različnih veličin v industriji, okolju, laboratorijih. So enostavni za uporabo v izvedbah za osnovne in zahtevnejše uporabnike. Kompatibilni so z izmenljivimi sondami, poleg tega pa ponujajo še wireless komunikacijo, bluetooth in več (odvisno od vrste instrumenta).

Prenosni instrumenti

Set Descending Direction

   

Izdelki 101 do 110 od 116 skupaj

  1. 8
  2. 9
  3. 10
  4. 11
  5. 12
  1. Merilnik Izmenične Napetosti DT4240

    Product features:

    • 0-125 VAC / 0-250 VAC / 0-450 VAC (rms max.) inputs
    • 5 digit LED display, 14.2 mm character height
    • 0.03% accuracy
    • 0-20 mA / 4-20 mA, galvanic isolated output
    • Min / max values detection
    • 2 limit-relay outputs
    • RS232 / RS485 communication, MODBUS RTU protocol
    • 96 x 48 mm panel instrument
    • 18-40 V AC/DC or 180-250 V AC/DC power supply
    • IP65 front side protection

  2. Nastavljiv Galvanski Izolator DT1102 V

    Product features:

    • Selectable and scalable input ranges:
      -125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
    • Selectable and scalable output renges:
      0-22 mA / 0–10.5 V
    • Configurable input and output parameters via USB port
    • 3 way isolation
    • Non-linearity: <0.01%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width

    Type designation:
    DT1102 V  20-50 VDC / 19-35 VAC power supply type
    DT1102 V PS  90-250 V AC/DC power supply type

  3. Nastavljiv Galvanski Izolator z Korenjenjem DT1102 ROOT

    Product features:

    • Selectable input/output ranges with front panel switches:
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
    • 3 way isolation
    • 20 V transmitter supply on the input for two wire transmitters
    • Error: < 0.05%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width
    • Square Root Characteristic

    Type designation:

    DT1102 ROOT  19–50 VDC / 19–35 VAC power supply type

    DT1102 ROOT PS  90–250 V AC/DC power supply type

  4. Nastavljiv Galvanski Izolator DT1102

    Product features:

    • Selectable input/output ranges with front panel switches:
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
      0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
    • 3 way isolation
    • 20 V transmitter supply on the input for two wire transmitters
    • Non-linearity: <0.01%
    • Temperature-coefficient: 25 ppm / °C typ.
    • 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 12.5 mm width


    Type designation:

    • DT1102  20-50 VDC / 19-35 VAC power supply type
    • DT1102 PS  90-250 V AC/DC power supply type

  5. (Ex) Napajalniki z Galvansko ločenim izhodom DT2500

    Product features:

    • Any output voltages between 6-24 VDC range
    • 6 / 8 / 10 / 12 / 15 / 18 / 24 VDC nominal output
    • Overcurrent-protection
    • Overvoltage-protection
    • 230 VAC power supply
    • TS-35 rail mounting, 35 mm width
    • 11 different types

  6. (Ex) Temperatura / Upor / Potenciometer Pretvorniki DT1310

    Product features:

    • Pt100 / Pt500 / Pt1000 inputs
    • Resistance / potentiometer inputs
    • 2 / 3 / 4 wire measurement
    • -200°C-800°C / 0-4000 ohm input ranges
    • 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
    • 0,03% accuracy
    • Easy configuration via IR transmission
    • 19-35 VDC supply voltage
    • TS-35 rail mounting, 12.5 mm width

  7. (Ex) NAMUR / Kontaktni Izolator DT13XX

    Product features:

    • NAMUR / contact inputs
    • Relay contact / transistor outputs
    • 1 / 2 / 4 channel versions
    • Line fault detection
    • Switch selectable mode of operation
    • 3 kHz transmission frequency (transistor output)
    • 19-29 VDC supply voltage
    • 12.5-22.5 mm széles, TS-35 sínre pattintható kivitelek
    • 11 different types

  8. (Ex) Izolator DT1315

    Product features:

    • 0-20 mA / 4-20 mA / 0-10 V inputs
    • 0-20 mA / 4-20 mA / 0-10 V outputs
    • Non-linearity < 0,01%
    • Temperature-coefficient < 50 ppm / °C
    • 19-29 VDC supply voltage
    • TS-35 rail mounting, 12.5 mm width
    • 9 different types

  9. (Ex) Izolator / Napajalnik DT1300

    Product features:

    • 0-20 mA / 4-20 mA / 0-10 V inputs
    • 0-20 mA / 4-20 mA / 0-10 V outputs
    • 17 VDC / 18 VDC transmitter supply
    • Non-linearity < 0.01%
    • Temperature-coefficient < 50 ppm / °C
    • 19-29 VDC supply voltage
    • TS-35 rail mounting, 12.5 mm width
    • 18 different types

  10. Analizator Omrežja PQRM5300

    Product features:

    • 3 x 0-125 VAC / 0-250 VAC galvanic isolated voltage inputs
      3 x 0-5 AAC / 0-1 AAC galvanic isolated current inputs
      CATIII measuring category
    • Neutral current measurement
    • Harmonic analysis and THD measurement on voltages and currents
    • Flicker measurement
    • Voltage asymmetry measurement
    • Network analysis according IEC61000-4-30
    • Storage trends, evens and ADC samples on SD card
    • Colour TFT graphics display
    • RS485 / Ethernet interface
      MODBUS RTU / ASCII slave / MODBUS TCP, HTTP, FTP, SMTP protocol
    • 0-20 mA / 4-20 mA galvanic isolated transmitter outputs
    • RS485 interface, MODBUS RTU/ASCII slave protocol
    • Digital outputs (Pulse output, Limit output)
    • Menu settings
    • 19-35 VAC / 20-50 VDC vagy 90-250 V AC/DC power supply
    • 96 x 96 mm panel instrument

Loading ...Load More ...
Set Descending Direction

   

Izdelki 101 do 110 od 116 skupaj

  1. 8
  2. 9
  3. 10
  4. 11
  5. 12
[profiler]
Memory usage: real: 39059456, emalloc: 38140296
Code ProfilerTimeCntEmallocRealMem