Prenosni instrumenti
Kimo prenosni instrumenti so namenjeni merjenju različnih veličin v industriji, okolju, laboratorijih. So enostavni za uporabo v izvedbah za osnovne in zahtevnejše uporabnike. Kompatibilni so z izmenljivimi sondami, poleg tega pa ponujajo še wireless komunikacijo, bluetooth in več (odvisno od vrste instrumenta).
Prenosni instrumenti
DT9100 / DT9102 features:
- HH : MM 24h time format
- Local or central synchronizing
- Battery-powered or loop-powered
- 25.4 mm character height
- 2 galvanic isolated output
- ±1 minute/year accuracy
- Intrinsically safe (zone 1, 2)
- Easy on-site configuration
- IP 65 protection
- IP 65 front protection (DT9102)
IP 30 rear protection
DT9100 N / DT9102 N features:
- HH : MM 24h time format
- Local or central synchronizing
- Battery-powered or loop-powered
- 25.4 mm character height
- 2 galvanic isolated output
- ±1 minute/year accuracy
- Easy on-site configuration
- IP 65 protection
- IP 65 front protection (DT9102 N)
IP 30 rear protection
DT9500 N features:
- Pt100 input, 3 / 4 wire measurement
- -200-600°C measuring range
- 0.3°C accuracy
- 4-20 mA loop powered
- Easy on-site configuration
- Calibrated sensor curve fitting
- 2 isolated limit outputs
- Min / Max values detection
- 4 1/2 digit LCD, 20.5 mm character height
- IP 65 protection
DT9500 / DT9502 features:
- Pt100 input, 3 / 4 wire measurement
- -200-600°C measuring range
- 0.3°C accuracy
- 4-20 mA loop powered
- Easy on-site configuration
- Calibrated sensor curve fitting
- 2 isolated limit outputs
- Min / Max values detection
- 4 1/2 digit LCD, 20.5 mm character height
- Intrinsically safe (zone 1, 2)
- IP 65 protection
- IP 65 front protection (DT9502)
IP 30 rear protection
Product features:
- Measuring of the pressure-differences of gases
- Measurement ranges between 0-5000 Pa
- LCD display
- Intrinsically safe
- 4-20 mA two-wire transmitter
- Medium temperature: up to 60°C
- IP 65 protection
Product features:
- Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
- RS485 communication output with MODBUS RTU/ASCII slave protocol
- Configurable input and communication parameters via USB port
- 3 way isolation
- Non-linearity: <0.01%
- Temperature-coefficient: 25 ppm / °C typ.
- 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
- TS-35 rail mounting, 12.5 mm width
Type designation:
DT1102 M 20-50 VDC / 19-35 VAC power supply type
DT1102 M PS 90-250 V AC/DC power supply type
DT4122 features:
- Pt100 / Pt500 / Pt1000, resistance / potentiometer inputs,
- 2 / 3 / 4 wire measurement
- 5 digit LED display, 20.3mm character height
- 0,1°C resolution
- 0-20 mA / 4-20 mA, galvanic isolated output (opcional)
- 2 limit relay output (opcional)
- RS232 / RS485 communication, Modbus RTU protocol (opcional)
- 144 x 72 mm panel instrument
- 18-40 V AC/DC or 180-250 V AC/DC power supply
- Protection IP65 (front), IP30 (rear)
DT4120 features:
- Pt100 / Pt500 / Pt1000, resistance / potentiometer inputs, 2 / 3 / 4 wire measurement
- 5 digit red LED display, 14.2 mm character height
- 0.1°C resolution· 0-20 mA / 4-20 mA, galvanic isolated output (optional)
- 2 limit relay output (opcional)
- RS232 / RS485 communication, Modbus RTU protocol (opcional)
- 96 x 48 mm panel instrument
- 18-40 V AC/DC or 180-250 V AC/DC power supply
- Protection IP65 (front), IP30 (rear)
Product features:
- Display in engineering units
- 4 1/2 digit LCD, 20,5 mm character height
- 4–20 mA loop powered
- 2 isolated limit outputs
- Min / Max values detection
- 0,02% accuracy
- Intrinsically safe (zone 1, 2)
- Easy on-site configuration
- IP 65 front
IP 30 rear
DT4232 features:
- RS232 / RS485 communication interface, Modbus RTU slave protocol
- 5 digit LED display, 20.3 mm character height
- 144 x 72 mm panel instrument
- 18-40 V AC/DC or 180-250 V AC/DC power supply
- Protection IP65 (front), IP30 (rear)