Product was successfully added to your shopping cart.
0item(s)

Vaša košarica je prazna

Anemometri - Merilniki pretoka zraka

Kimo Anemometri (merilniki hitrosti zraka), so enostavni za uporabo in natančni pri merjenju hitrosti zraka, pretok zraka, temperaturo (odvisno od modela). VT210 model se uporablja za kontrolo ventilacijskega sistema, VT110/VT115, pa ima žarilno nitko.

Anemometri

Set Descending Direction

   

Izdelki 1 do 10 od 66 skupaj

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Prenosni Merilnik UV Sevanja DT6000

    DT 6000 fetures:

    • different type of unit version (UVI, W/m²)
    • 3 1/2 digits LCD display with 12.7 mm character height
    • handheld version
    • quick sets
    • 5 % accuracy

  2. Napajanje DT2014

    DT2014 features:

    • 4 x 22 VDC, 25 mA stabilized outputs
    • Outputs are galvanic isolated from each other
    • Overcurrent-protection with limiter characteristics
    • 190-250 VAC / 90-250 VDC power supply ranges
    • TS-35 rail mounting 12.5 mm width only

  3. Števec Pulzov DEMS5005

    Product features:

    • 8 x NAMUR / contact inputs
    • Counting of incoming pulses
    • Measuring the time between the incoming pulses 
    • RS232 / RS485 communication, MODBUS RTU protocol
    • Configuration via USB port
    • 24 V AC/DC, 230 V AC/DC power supply
    • TS-35 rail mounting, 45 mm width

    Type designation:
    DEMS5005 RS2 20-50 VDC / 19-35 VAC power supply, RS232 interface
    DEMS5005 RS2  PS 90-250 V AC/DC power supply, RS232 interface
    DEMS5005 RS4 20-50 VDC / 19-35 VAC power supply, RS485 interface
    DEMS5005 RS4  PS 90-250 V AC/DC power supply, RS485 interface

  4. Multifunkcijski Trifazni Močnostni Pretvornik PQRM5100 31

    Product features:

    • More then 50 different measured parameters
    • 3 x 0-125 VAC / 0-250 VAC non galvanic isolated voltage input
      3 x 0-5 AAC / 0-1 AAC galvanic isolated current input
      CAT III category
    • Different measuring arrangement
    • 2 x 0-20 mA / 4-20 mA galvanic isolated outputs
    • RS485 interface, MODBUS RTU/ASCII Slave protocol
    • 2 x Pulse outputs / Limit-relay outputs
    • Configuration by PC via USB port
    • 19-35 VAC / 20-50 VDC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 22.5 mm width

  5. Trifazni Močnostni Pretvornik DEMS5030

    Product features:

    • More than 50 different measured parameters:
      Ueff, Ieff, f, P, S, Q, PF, φ, +EP, -EP, +EQ, -EQ (each phase)P, S, Q, PF, +EP, -EP, +EQ, -EQ (sum)UL1-L2, UL2-L3, UL1-L3, φL1-L2, φL1-L3 (between phase)P1/4h average value, P1/4h estimated average value, Plast 1/4h average value, t1/4h rest (demand)
    • 3 x 0-125 VAC / 0-250 VAC / 0-450 VAC,
      3 x 0-5 AAC / 0-1 AAC galvanic isolated inputs
      CATIII measurement category
    • 2 / 4 x 0-20 mA / 4-20 mA galvanic isolated outputs
    • RS232 / RS485 / ETHERNET interface
      MODBUS RTU slave / MODBUS TCP, HTTP protocol
    • 2 limit-relay outputs
    • Synchronous and time zone signal inputs
    • Pulse outputs
    • Configuration via USB port
    • 24 V AC/DC, 230 V AC/DC power supply
    • TS-35 rail mounting, 90 mm width

  6. Multifunkcijski Enofazni Močnostni Pretvornik PQRM5100 11

    Product features:

    • Measuring of 14 different single phase parameters:
      Ueff, Ieff, P, Q, S, +Ep, -Ep, +EQ, -EQ, PF, f, ϕ, THD U, THD I
    • 0-125 VAC / 0-250 VAC non galvanic isolated voltage input
      0-5 AAC / 0-1 AAC galvanic isolated current input
      CAT III measurement category
    • 2 x 0-20 mA / 4-20 mA galvanic isolated outputs
    • MODBUS RTU/ASCII Slave communication
    • 2 x Pulse outputs / Limit-relay outputs
    • Configuration by PC via USB port
    • 19-35 VAC / 20-50 VDC or 90-250 V AC/DC power supply
    • TS-35 rail mounting, 22.5 mm width

  7. Enofazni Močnostni Pretvornik DEMS5010

    Product features:

    • Measuring of 12 different parameters:
      Ueff, Ieff, P, Q, S, +Ep, -Ep, +EQ, -EQ, PF, f, ϕ
    • 0-125 VAC / 0-250 VAC / 0-450 VAC and
      0–5 AAC / 0–1 AAC galvanic isolated inputs
      CATIII measurement category
    • 2 x 0-20 mA / 4-20 mA galvanic isolated outputs
    • RS232 / RS485 / ETHERNET communication interface
      MODBUS RTU slave / MODBUS TCP, HTTP protocol
    • 2 limit-relay outputs
    • Synchronous and time zone signal inputs
    • Pulse outputs
    • Configuration via USB port
    • 24 V AC/DC, 230 V AC/DC power supply
    • TS-35 rail mounting, 45 mm width

  8. Končna Stikala DT1400

    Product features:

    • 0–20 mA / 4–20 mA / 0–10 V / 2–10 V / 0–5 V inputs
    • 2 / 4 x limit-relay outputs
    • Process indicator function
    • 5 digit LED display, 7,6 mm character height
    • Menu based configuration 
    • 0–20 mA / 4–20 mA isolated output
    • Transmitter supply
    • 18–40 V DC / 14–29 V AC power supply or 140–250 V AC / 180–250 V DC mains
    • TS-35 rail mounting, 45 mm width

  9. AC-Napetostni Pretvornik DT1600 U

    Product features:

    • 0-125 VAC / 0-250 VAC / 0-450 VAC measurement ranges
    • Galvanic isolated input, CAT III
    • Average values / RMS values
    • 0.2 accuracy class
    • 0-20 mA / 4-20 mA / 0-10 V transmitter outputs
    • 18-40 V AC/DC / 180-250 V AC/DC power supply
    • TS-35 rail mounting, 22.5 mm width
    • Full EN 60688 compliance

  10. AC-Tokovni Pretvornik DT1600 I

    Product features:

    • 0-1 AAC / 0-5 AAC measurement ranges
    • Galvanic isolated inputs, CAT III
    • Average values / True RMS values
    • 0.2% accuracy class
    • 0-20 mA / 4-20 mA / 0-10 V outputs
    • 18-40 V AC/DC or 18-250 V AC/DC power supply
    • TS-35 rail mounting, 22.5 mm width
    • Full EN 60688 compliance

Loading ...Load More ...
Set Descending Direction

   

Izdelki 1 do 10 od 66 skupaj

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5