Anemometri - Merilniki pretoka zraka

Kimo Anemometri (merilniki hitrosti zraka), so enostavni za uporabo in natančni pri merjenju hitrosti zraka, pretok zraka, temperaturo (odvisno od modela). VT210 model se uporablja za kontrolo ventilacijskega sistema, VT110/VT115, pa ima žarilno nitko.

Anemometri

Temperatura / Potenciometer / Upor Galvansko Ločen Pretvornik DT1010 RL
Product features:
- Pt100 / Pt500 / Pt1000 inputs
- Resistance / potentiometer inputs
- 2 / 3 / 4 wire measurement
- -200°C-800°C / 0-4000 ohm input ranges
- 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
- 2 / 4 pcs limit relay output
- 0.03% accuracy
- Easy configuration via USB port
- 24 V AC/DC / 230 V AC/DC supply voltage
- TS-35 rail mounting, 22.5 / 35 mm width
Temperatura / Potenciometer / Upor Pretvornik DT1010
Product features:
- Pt100 / Pt500 / Pt1000 inputs
- Resistance / potentiometer inputs
- 2 / 3 / 4 wire measurement
- -200°C-800°C / 0-4000 ohm input ranges
- 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
- accuracy
- Easy configuration via USB port
- 24 VDC / 230 V AC/DC supply voltage
- TS-35 rail mounting, 12.5 / 17.5 mm width
- 0.03%
Upor / Potenciometer Pretvornik DT1005 I4
Product features:
- Resistance / potentiometer inputs
- 3 or 4 wire measurement
- 0-10000 ohm measurement ranges
- Two wire 4-20 mA transmitter
- 0.05% accuracy
- TS-35 rail mounting, 12.5 mm width
Merilnik Temperature / Pretvornik DT1000 I4
Product features:
- Pt100 input
- 3 or 4 wire measurement
- -200°C-600°C measurement ranges
- Two wire 4-20 mA transmitter
- 0.2°C accuracy
- 875 uA measuring current
- TS-35 rail mounting, 12.5 mm width
MODBUS Galvanski Izolator DT1102 M
Product features:
- Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
- RS485 communication output with MODBUS RTU/ASCII slave protocol
- Configurable input and communication parameters via USB port
- 3 way isolation
- Non-linearity: <0.01%
- Temperature-coefficient: 25 ppm / °C typ.
- 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
- TS-35 rail mounting, 12.5 mm width
Type designation:
DT1102 M 20-50 VDC / 19-35 VAC power supply type
DT1102 M PS 90-250 V AC/DC power supply type
Prenapetostna Zaščita DT320 / DT321
Product features:
- Transient voltage protection of the 4-20 mA current loop
- 3-stage protection
- 10 kA surge vawe (8 / 20 µs)
- 41 V max. Output noise voltage
- DIN rail mounting and IP 65 enclosure version
(Ex) Prikazovalnik Procesnih Veličin DT9000 / DT9002
DT9000 / DT9002 features:
- Display in engineering units
- 4 1/2 digit LCD, 20.5 mm character height
- 4-20 mA loop powered
- Min / Max values detection
- 2 isolated limit outputs
- 0.03 % accuracy, ±20 ppm / °C
- Intrinsically safe (zone 1, 2)
- Easy on-site configuration
- IP 65 protection
  IP 30 rear protection (DT9002)
Prikazovalnik Procesnih Veličin DT9000 N / DT9002 N
DT9000 N / DT9002 N features:
- Display in engineering units
- 4 1/2 digit LCD, 20.5 mm character height
- 4-20 mA loop powered
- Min / Max values detection
- 2 isolated limit outputs
- 0.03% accuracy, ±20 ppm / °C
- Easy on-site configuration
- DT9000: IP 65
- DT9002: IP 65 front
  IP 30 rear
Pretvornik Tlak-Tok DT710
Product features:
- Measuring of the pressure of gases
- Temperature of the medium: up to 40 °C
- 11 measurement ranges between 0 and 6 bar
- 4-20 mA two-wire remote transmitter
- Construction, push mountable on TS-32, TS-35 rails
- IP 20 protection
(Ex) Pretvorniki / Merilnik Diferenčnega Tlaka DT7000
Product features:
- Measuring of the pressure-differences of gases
- Measurement ranges between 0-5000 Pa
- LCD display
- Intrinsically safe
- 4-20 mA two-wire transmitter
- Medium temperature: up to 60°C
- IP 65 protection