Manometri / Micromanometri

Kimo manometri lahko merijo več parametrov hkrati, ki se prikazujejo izmenično. Micromanometer MP 210 lahko prikazuje do 6 parametrov naenkrat.

MP 210 in AMI 310 imata več vhodov za sonde kot so npr. pitot cevi, Pt100, sonde za merjenje kvalitete zraka, obratov, hitrost zraka, itd.

Manometri / Micromanometri

Temperatura / Potenciometer / Upor Galvansko Ločen Pretvornik DT1010 RL
Product features:
- Pt100 / Pt500 / Pt1000 inputs
- Resistance / potentiometer inputs
- 2 / 3 / 4 wire measurement
- -200°C-800°C / 0-4000 ohm input ranges
- 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
- 2 / 4 pcs limit relay output
- 0.03% accuracy
- Easy configuration via USB port
- 24 V AC/DC / 230 V AC/DC supply voltage
- TS-35 rail mounting, 22.5 / 35 mm width
Temperatura / Potenciometer / Upor Pretvornik DT1010
Product features:
- Pt100 / Pt500 / Pt1000 inputs
- Resistance / potentiometer inputs
- 2 / 3 / 4 wire measurement
- -200°C-800°C / 0-4000 ohm input ranges
- 0-20 mA / 4-20 mA / 0-10 V / 2-10 V output ranges
- accuracy
- Easy configuration via USB port
- 24 VDC / 230 V AC/DC supply voltage
- TS-35 rail mounting, 12.5 / 17.5 mm width
- 0.03%
Upor / Potenciometer Pretvornik DT1005 I4
Product features:
- Resistance / potentiometer inputs
- 3 or 4 wire measurement
- 0-10000 ohm measurement ranges
- Two wire 4-20 mA transmitter
- 0.05% accuracy
- TS-35 rail mounting, 12.5 mm width
Merilnik Temperature / Pretvornik DT1000 I4
Product features:
- Pt100 input
- 3 or 4 wire measurement
- -200°C-600°C measurement ranges
- Two wire 4-20 mA transmitter
- 0.2°C accuracy
- 875 uA measuring current
- TS-35 rail mounting, 12.5 mm width
MODBUS Galvanski Izolator DT1102 M
Product features:
- Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
- RS485 communication output with MODBUS RTU/ASCII slave protocol
- Configurable input and communication parameters via USB port
- 3 way isolation
- Non-linearity: <0.01%
- Temperature-coefficient: 25 ppm / °C typ.
- 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
- TS-35 rail mounting, 12.5 mm width
Type designation:
DT1102 M 20-50 VDC / 19-35 VAC power supply type
DT1102 M PS 90-250 V AC/DC power supply type
Prenapetostna Zaščita DT320 / DT321
Product features:
- Transient voltage protection of the 4-20 mA current loop
- 3-stage protection
- 10 kA surge vawe (8 / 20 µs)
- 41 V max. Output noise voltage
- DIN rail mounting and IP 65 enclosure version
(Ex) Prikazovalnik Procesnih Veličin DT9000 / DT9002
DT9000 / DT9002 features:
- Display in engineering units
- 4 1/2 digit LCD, 20.5 mm character height
- 4-20 mA loop powered
- Min / Max values detection
- 2 isolated limit outputs
- 0.03 % accuracy, ±20 ppm / °C
- Intrinsically safe (zone 1, 2)
- Easy on-site configuration
- IP 65 protection
  IP 30 rear protection (DT9002)
Prikazovalnik Procesnih Veličin DT9000 N / DT9002 N
DT9000 N / DT9002 N features:
- Display in engineering units
- 4 1/2 digit LCD, 20.5 mm character height
- 4-20 mA loop powered
- Min / Max values detection
- 2 isolated limit outputs
- 0.03% accuracy, ±20 ppm / °C
- Easy on-site configuration
- DT9000: IP 65
- DT9002: IP 65 front
  IP 30 rear
Pretvornik Tlak-Tok DT710
Product features:
- Measuring of the pressure of gases
- Temperature of the medium: up to 40 °C
- 11 measurement ranges between 0 and 6 bar
- 4-20 mA two-wire remote transmitter
- Construction, push mountable on TS-32, TS-35 rails
- IP 20 protection
(Ex) Pretvorniki / Merilnik Diferenčnega Tlaka DT7000
Product features:
- Measuring of the pressure-differences of gases
- Measurement ranges between 0-5000 Pa
- LCD display
- Intrinsically safe
- 4-20 mA two-wire transmitter
- Medium temperature: up to 60°C
- IP 65 protection