Tlak

Prikazovalnik Procesnih Veličin DT4220 E
DT4220 E features:
- 0-20 mA / 4-20 mA / 0-10 V / 2-10 V / 0-5 V inputs
- 5 digit LED display, 14.2 mm character height, colors: red, yellow, green, blue
- 0,03% accuracy
- 0-20 mA / 4-20 mA, galvanic isolated output(optional)
- 2 limit relay output (optional)
- RS232 / RS485 communication, Modbus RTUprotocol (optional)
- 96 x 48 mm panel instrument
- 19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
- Protection IP65 (front), IP30 (rear)
Prikazovalnik Procesnih Veličin DT9000 N, DT9002 N
DT9000 N / DT9002 N features:
- Display in engineering units
- 4 1/2 digit LCD, 20.5 mm character height
- 4-20 mA loop powered
- 2 isolated limit outputs
- Min / Max values detection
- 0.01% accuracy, ±20 ppm / °C
- Easy on-site configuration
- IP 65 front side
- IP 65 rear side (DT9000 N)
  IP 30 rear side (DT9002 N)
Prikazovalnik Procesnih Veličin DT 4200, DT420 E
DT4200 / DT420 E features:
- Display in engineering units
- 4 1/2 digit LCD display, 15 mm character height (DT4200)
  3 1/2 digit LCD display, 15 mm character height (DT420 E)
- 4–20 mA loop-powered
- 2 isolated limit outputs
- Min / Max values detection
- 0.01% accurary, ±20 ppm / °C (DT4200)
  0.02% accuracy, ±20 ppm / °C (DT420 E)
- Easy on site configuration
- IP 65 front side
  IP 30 rear side
MP 120 Micromanometer

KIMO Micromanometer MP 120 vam omogoča enostavno HVAC merjenje tlaka. Je prenosen, enostaven za uporabo in primeren za merjenje tlaka in hitrost zraka.

Merilno območje instrumenta:
Tlak: -1000 do + 1000 Pa
Hitrost zraka: 0 do 40 m/s

Dobavljen v kovčku in s certifikatom o kalibraciji.

MP 110 / 111 / 112 / 115 Manometer

KIMO prenosni merilni instrumenti dif. tlaka MP 110 / 111 / 112 / 115 so primerni za uporabo v čistih prostorih.

Merilno območje:

MP 110 - Piezouporovni: -1000 do +1000 Pa
MP 111 - Piezouporovni: -1000 do + 1000 mmH20
MP 112 - Piezouporovni: -2000 do +2000 mbar
MP 115 - Piezouporovni: -500 do +500 mbar

Dobavljen v kovčku in s certifikatom o kalibraciji.

MP 55 Manometer

KIMO MP 55 je majhen, enostaven za uporabo, narejen za testiranje atmosferskega tlaka.

Merilno območje instrumenta:

od 700 do 1100 mbar

Dobavljen v torbici in s certifikatom.

Termometer DT4120

DT4120 features:

Pt100 / Pt500 / Pt1000, resistance / potentiometer inputs, 2 / 3 / 4 wire measurement
5 digit red LED display, 14.2 mm character height
0.1°C resolution· 0-20 mA / 4-20 mA, galvanic isolated output (optional)
2 limit relay output (opcional)
RS232 / RS485 communication, Modbus RTU protocol (opcional)
96 x 48 mm panel instrument
18-40 V AC/DC or 180-250 V AC/DC power supply
Protection IP65 (front), IP30 (rear)

Termometer DT4122

DT4122 features:

Pt100 / Pt500 / Pt1000, resistance / potentiometer inputs,
2 / 3 / 4 wire measurement
5 digit LED display, 20.3mm character height
0,1°C resolution
0-20 mA / 4-20 mA, galvanic isolated output (opcional)
2 limit relay output (opcional)
RS232 / RS485 communication, Modbus RTU protocol (opcional)
144 x 72 mm panel instrument
18-40 V AC/DC or 180-250 V AC/DC power supply
Protection IP65 (front), IP30 (rear)

Termometer DT9502 N

DT9502 N features:

Pt100 input, 3 / 4 wire measurement
0.1°C sensitivity, -200–600°C measuring range
4–20 mA loop powered
0.03% accuracy
2 isolated limit outputs
Easy on-site configuration
Calibrated sensor curve fitting
Min / Max values detection
Large size (20.5 mm) LCD display
IP 65 front
IP 30 rear

Nastavljiv Galvanski Izolator z Korenjenjem DT1102 ROOT

Product features:

Selectable input/output ranges with front panel switches:
0-20 mA / 4-20 mA / 0-10 V / 2-10 V input
0-20 mA / 4-20 mA / 0-10 V / 2-10 V output
3 way isolation
20 V transmitter supply on the input for two wire transmitters
Error: < 0.05%
Temperature-coefficient: 25 ppm / °C typ.
19-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
TS-35 rail mounting, 12.5 mm width
Square Root Characteristic

Type designation:

DT1102 ROOT 19–50 VDC / 19–35 VAC power supply type

DT1102 ROOT PS 90–250 V AC/DC power supply type