Novi Izdelki

Večkanalni display za vgradnjo v čiste prostore in laboratorije. ATE 310 izmenično prikazuje 3 parametre (npr. vlaga, temperatura, tlak). Primeren za vgradnjo v steno.

Dobavljen z tehničnimi podatki, navodili za uporabo in certifikatom.

Product features:

• NAMUR, switching transistor, contact inputs
• 4 limit outputs
• 4-20 mA scalable analog output
• The following parameters can be set: teeth number, gearing, limit values, 4-20 mA scale
• Large (25 mm) LCD
• Intrinsically safe (zone 1, 2)
• IP 65 protection

DT9500 / DT9502 features:

• Pt100 input, 3 / 4 wire measurement
• -200-600°C measuring range
• 0.3°C accuracy
• 4-20 mA loop powered
• Easy on-site configuration
• Calibrated sensor curve fitting
• 2 isolated limit outputs
• Min / Max values detection
• 4 1/2 digit LCD, 20.5 mm character height
• Intrinsically safe (zone 1, 2)
• IP 65 protection
• IP 65 front protection (DT9502)
  IP 30 rear protection

DT9000 / DT9002 features:

• Display in engineering units
• 4 1/2 digit LCD, 20.5 mm character height
• 4-20 mA loop powered
• Min / Max values detection
• 2 isolated limit outputs
• 0.03 % accuracy, ±20 ppm / °C
• Intrinsically safe (zone 1, 2)
• Easy on-site configuration
• IP 65 protection
  IP 30 rear protection (DT9002)

Product features:

• Transient voltage protection of the 4-20 mA current loop
• 3-stage protection
• 10 kA surge vawe (8 / 20 µs)
• 41 V max. Output noise voltage
• DIN rail mounting and IP 65 enclosure version

Product features:

• More than 50 different measured parameters:
  Ueff, Ieff, f, P, S, Q, PF, φ, +EP, -EP, +EQ, -EQ (each phase)P, S, Q, PF, +EP, -EP, +EQ, -EQ (sum)UL1-L2, UL2-L3, UL1-L3, φL1-L2, φL1-L3 (between phase)P1/4h average value, P1/4h estimated average value, Plast 1/4h average value, t1/4h rest (demand)
• 3 x 0-125 VAC / 0-250 VAC / 0-450 VAC,
  3 x 0-5 AAC / 0-1 AAC galvanic isolated inputs
  CATIII measurement category
• 2 / 4 x 0-20 mA / 4-20 mA galvanic isolated outputs
• RS232 / RS485 / ETHERNET interface
  MODBUS RTU slave / MODBUS TCP, HTTP protocol
• 2 limit-relay outputs
• Synchronous and time zone signal inputs
• Pulse outputs
• Configuration via USB port
• 24 V AC/DC, 230 V AC/DC power supply
• TS-35 rail mounting, 90 mm width

Product features:

• 0–20 mA / 4–20 mA / 0–10 V / 2–10 V / 0–5 V inputs
• 2 / 4 x limit-relay outputs
• Process indicator function
• 5 digit LED display, 7,6 mm character height
• Menu based configuration 
• 0–20 mA / 4–20 mA isolated output
• Transmitter supply
• 18–40 V DC / 14–29 V AC power supply or 140–250 V AC / 180–250 V DC mains
• TS-35 rail mounting, 45 mm width

Product features:

• 0-125 VAC / 0-250 VAC / 0-450 VAC measurement ranges
• Galvanic isolated input, CAT III
• Average values / RMS values
• 0.2 accuracy class
• 0-20 mA / 4-20 mA / 0-10 V transmitter outputs
• 18-40 V AC/DC / 180-250 V AC/DC power supply
• TS-35 rail mounting, 22.5 mm width
• Full EN 60688 compliance

Product features:

• 0-1 AAC / 0-5 AAC measurement ranges
• Galvanic isolated inputs, CAT III
• Average values / True RMS values
• 0.2% accuracy class
• 0-20 mA / 4-20 mA / 0-10 V outputs
• 18-40 V AC/DC or 18-250 V AC/DC power supply
• TS-35 rail mounting, 22.5 mm width
• Full EN 60688 compliance

Product features:

• Selectable input ranges:-125 - +125 V / -2.5 - +2.5 V / -25 - +25 mA
• RS485 communication output with MODBUS RTU/ASCII slave protocol
• Configurable input and communication parameters via USB port
• 3 way isolation
• Non-linearity: <0.01%
• Temperature-coefficient: 25 ppm / °C typ.
• 20-50 VDC / 19-35 VAC or 90-250 V AC/DC power supply
• TS-35 rail mounting, 12.5 mm width

Type designation:
DT1102 M 20-50 VDC / 19-35 VAC power supply type
DT1102 M PS 90-250 V AC/DC power supply type